Sliding Retractable Trolling Motor Mount kits


Do you own a trolling motor? Then you need this!

Are you tired of dealing with expensive trolling motor damage when docking, launching, or from unseen objects in the water?  We are too! So here's the answer! This simple yet very effective mount system allows you to retract the entire trolling motor and protect it from damage by securing it INSIDE the boundary of the hull. Unlike most other mount systems, ours allows you to seamlessly adjust the position of the motor while you are stowing, docking or deploying with no knobs to turn, pins to pull or anything else other than normal motions you would do when using it as designed by the manufacturer. Don't keep replacing damaged props, shafts or housings due to permanent mountings. Add this simple linear system to most trolling motors and save money, time and aggravation!

Unit Description

Our most cost effective linear mounting system with a LIFETIME, unlimited use warranty. This model is designed to provide a movable mount base for your trolling motor or other applicable equipment. The amount of force needed to move the carriage along the rail can be easily adjusted to suite you needs in a linear or non-linear fashion by simply adjusting the included friction screws with a simple turn. Keeping our designs simple, yet effective is what makes our kits so popular and so cost effective.

Rail Length: 12 inches 

Carriage Length: 5.25 inches 

Carriage travel: 7.00 inches (optional 9.00 inches w/ LAN-12 cable) 

Carriage height: 1.5 inches 

Rated load: 75 lbs 

Warranty:  LIFETIME, full replacement* 


These units are designed to be used with the following mount systems or trolling motors that share the same bracket bolt patterns as below. Do you have a Pontoon boat, bass boat, saltwater rig, canoe, fishing vessel? It doesn't matter. We have been installed on many vessels that share the below motor usage. 

Minn Kota: Ulterra, Terrova, Powerdrive, Riptide Ulterra, Riptide Terrova, Riptide Powerdrive, Riptide SP/ST, PD/HC Pontoon and DH40  in any shaft length or voltage configuration

MotorGuide: Xi5 and Xi3 in any shaft length or voltage configuration

Rhodan HD GPS anchors - Water Snake models - RTA-17, MKA-21 and RTA-54 Quick Release mounts - JM55007 (RTA-17 / MKA-21 clone) Quick Release mounts and many other brands that share the same bolt patterns as above 

Included in each kit

1ea - SS-12-15 Moveable Mount Base w/ rail system

1ea - All Hardware required for a clean installation and/or mounting to your existing trolling motor

1ea - Spacer rail kit and hardware (Required and shipped with Xi5 series applications ONLY - please notify us if you use this series motor)

1ea - Complete instruction manual and guide with FREE installation support if needed 

See it in action

Curious as to how it operates? View our demo videos below and see for yourself. This low cost option will not only make life easier when docking, storing or in motion but can potentially save you thousands towards the cost of repairs or a new motor due to unforeseen damages.  

Call us now

SS-12-15 Demo 1

Operational Demo 1

SS-12-15 Demo 2

Operational Demo 2

SS-12-15 Retractable Sliding trolling motor mount install

Check out this great video

Beacon Series Marine Monitors


Rugged Waterproof Marine Monitors

The Beacon Series high quality monitors, from SCANCORPORATION.com, are designed for the discerning yachtsman. These high quality, long-life monitors boast a precision machined industrial grade case that is sturdy and IP65 rated...not the composite plastic cases found in so many other lower grade monitors. The aluminum case is then anodized and powder coated for a finish that is rugged, textured and stylish, along with stainless steel fasteners/hardware, high quality waterproof connections, and industrial/marine grade electronics. Your concerns regarding corrosion or water damage affecting your monitor's internal components are minimal.


Installation options, with either the water-tight enclosed or open frame configurations, allow for all types of front or rear bulkhead mounting. In addition, an industry standard mounting arm pattern allows for limitless custom mounting arrangements. Front panel controls afford you easy access to power on/off and allow you to adjust your Beacon monitor settings using the on-screen display, which also includes an auto setup feature. All of this translates into a marine monitor that is designed for longevity, meets the needs of your helm configuration and offers you a brilliant, crisp color display in either standard brightness or a sunlight viewable, high bright display. Prices start at $995.00. Please contact us for quotes on any Beacon products. Dealer and Reseller packages available.

Beacon LED and LCD Monitors are available in many sizes with and without Touch options. Standard and High Brightness units range from 400 nits to 1500 nits accompanied with impact resistant AR Glass for serious protection. Average field life span is a minimum of 10 years under normal operating conditions per current client data logs. Contact us for your specific applications.

Technical Document

Beacon Series Marine Computers


Rugged Solid State Navigation Computers

Beacon Marine high performance, rugged navigational computers. Engineered for today’s most extreme embedded and industrial applications, our Rugged Line of hardened PCs provides the highest level of computing in a compact, ultra-durable, easy to integrate footprint. Our Rugged Line stands up to shock, vibration and extreme temperatures, and features the latest generation of processing technology for lightning fast performance.These units are built to endure harsh shock and constant vibrations. Built with G-rated solid state hard drives and rubber mounting brackets, these units can withstand environments where many others will certainly fail. Beacon PCs feature the latest Intel processors, High-End Video Graphics, 4GB-16GB memory, the latest Microsoft© Operating Systems and 12V or 24V power-in options. 

The SC500M and SC600M Series utilize cross-case ventilation to keep fan noise to a minimum, while providing the system with the ability to operate 24/7 without failure. With the elements in mind, the custom enclosure inhibits rust with its durable zinc coated steel construction. Double right angle folds at interfacing edges reduce EMI and improve EMC performance.

Built with past and present applications in mind, the SC500M and SC600M offer a wide range of modern and legacy connectivity for newer and tested vessels. With a range of Intel processor options and long life-cycle components, these units prove flexible and efficient. With high-end video graphics options on the SC600M series, there will not be any navigational map issues or slow loading pictures...we have it covered!

Technical Document
Gen 1 & 2 Marine Monitor SeriesDownload
SC500M_Solid State Beacon Computer SeriesDownload
Generation 3 Marine Monitor SeriesDownload